Dad How To in 2023: Expert Tips for Navigating Parenthood Like a Pro

Want To Improve Your Looks & Body?

dad how to

In This Article

Dad, how to tie a necktie properly?

Step-by-Step Guide to Tying a Necktie

Tying a necktie is an essential skill for any man. Whether you need to dress up for a formal event or simply want to look polished and put-together, knowing how to tie a necktie properly is key. Follow these steps to achieve the perfect knot:

1. Start with the wide end on your right side and the narrow end on your left side.

Make sure the wide end hangs about 12 inches lower than the narrow end.

2. Cross the wide end over the narrow end.

Bring the wide end up through the loop between your collar and the tie.

3. Bring the wide end behind the narrow end.

Pass it horizontally from right to left.

4. Pull the wide end up through the loop again.

This time, bring it down through the front of the knot that has formed in front of your collar.

5. Tighten and adjust as needed.

Gently pull on both ends of the tie until it is snug against your collar. Make sure it is centered and straight before tucking it into your shirt.

Tying a necktie may take some practice, but with time, you’ll become proficient at creating various knots such as Windsor, Half-Windsor, or Four-in-Hand. Remember to choose a tie that complements your outfit and experiment with different patterns and colors for added style!

Dad, how to change a flat tire on a car?

A Step-by-Step Guide for Changing a Flat Tire

Getting a flat tire can be frustrating, but knowing how to change it yourself can save you time and money. Follow these steps to safely replace a flat tire:

1. Find a safe location.

If possible, move your car to a flat and stable surface away from traffic. Turn on your hazard lights to alert other drivers.

2. Gather the necessary tools.

You’ll need a spare tire, jack, lug wrench, and wheel wedges.

3. Loosen the lug nuts.

Using the lug wrench, turn each lug nut counterclockwise until they are loose but not fully removed.

4. Lift the car with the jack.

Refer to your car’s manual for proper placement of the jack. Pump the handle of the jack until the flat tire is off the ground.

5. Remove the lug nuts and old tire.

Fully unscrew and remove all the lug nuts, then carefully pull off the flat tire from its hub.

6. Mount the spare tire.

Lift the spare tire onto the hub and align it with the wheel bolts. Screw on each lug nut by hand until they are snugly in place.

7. Lower the car and tighten the lug nuts.

Gently lower your vehicle using the jack until it rests on all four wheels. Use your lug wrench to tighten each lug nut in a star pattern until they are securely fastened.

8. Check tire pressure and replace your spare as soon as possible.

After changing a flat tire, make sure to check that your spare has sufficient air pressure before driving. It’s important to replace the spare tire with a new one as soon as possible, as spares are not designed for long-term use.

Remember, if you’re unsure about changing a flat tire or encounter any difficulties, don’t hesitate to call for roadside assistance or ask for help from a professional.

Dad, how to grill the perfect steak?

A Guide to Grilling the Perfect Steak

Grilling a steak to perfection requires attention to detail and proper technique. Follow these steps to achieve a deliciously juicy and flavorful steak:

1. Choose the right cut of steak.

Select a high-quality cut like ribeye, New York strip, or filet mignon. Look for marbling (fat distributed throughout the meat) for added tenderness and flavor.

2. Preheat your grill.

Preheat your grill to high heat (around 450-500°F) for a good sear on the steak.

3. Season your steak.

Rub both sides of the steak with olive oil and season generously with salt and pepper. You can also add other herbs and spices according to your preference.

4. Sear the steak.

Place the steak on the hot grill grates and let it sear for about 2-3 minutes per side without moving it. This will create those beautiful grill marks and enhance flavor.

5. Adjust heat and continue cooking.

Maintain medium-high heat by reducing burner temperature or moving charcoal away from direct flames. Cook each side of the steak for an additional 3-5 minutes per side, depending on thickness and desired doneness:

  • Rare: 120-125°F internal temperature
  • Medium-rare: 130-135°F internal temperature
  • Medium: 140-145°F internal temperature
  • Medium-well: 150-155°F internal temperature
  • Well done: 160°F and above internal temperature

6. Rest the steak.

Remove the steak from the grill and let it rest for about 5 minutes on a cutting board. This allows the juices to redistribute, resulting in a more tender and flavorful steak.

7. Slice and serve.

Slice your steak against the grain for maximum tenderness. Serve it as is or with your favorite side dishes, sauces, or compound butter.

Remember, practice makes perfect when it comes to grilling steaks. Experiment with different cuts, seasonings, and cooking times to find your preferred level of doneness and flavor!

Dad, how to unclog a sink without calling a plumber?

Tips for Unclogging a Sink Without a Plumber’s Help

A clogged sink can be an inconvenience, but you don’t always need to call a plumber to fix it. Try these DIY methods before reaching for the phone:

1. Use boiling water.

Carefully pour boiling water down the drain in two to three stages, allowing it to work for several seconds between each pour. This can help dissolve minor clogs caused by grease or soap buildup.

2. Try using baking soda and vinegar.

Pour half a cup of baking soda down the drain followed by half a cup of vinegar. Cover the drain with a plug or cloth to contain the reaction. After about 30 minutes, flush the drain with hot water.

3. Use a plunger.

If the clog is in a sink with an overflow hole, cover it with duct tape or a wet cloth to create a seal. Fill the sink partially with water, place the plunger over the drain, and vigorously plunge up and down for several minutes. Repeat as necessary.

4. Remove and clean the trap.

Place a bucket under the sink to catch any water that may spill out. Use pliers or a wrench to loosen and remove the trap (the U-shaped pipe) beneath the sink. Clean it thoroughly, removing any debris or clogs before reattaching it.

5. Use a plumbing snake or wire hanger.

If you suspect a deeper clog, use a plumbing snake or straightened wire hanger to reach down into the drain and break up any blockages manually.

6. Try an enzymatic cleaner.

An enzymatic cleaner can be effective for breaking down organic matter causing clogs over time. Follow the instructions on the product label for best results.

7. Prevent future clogs.

Avoid pouring grease, oil, coffee grounds, hair, and other debris down your sink drains. Use drain covers or strainers to catch solids and regularly clean them out.

If these DIY methods don’t resolve your sink clog or if you’re uncomfortable attempting them yourself, it’s best to call a professional plumber to avoid causing further damage.

Dad, how to build a bookshelf from scratch?

A Step-by-Step Guide for Building a Bookshelf

Building a bookshelf from scratch can be a rewarding project that adds both functionality and style to your home. Follow these steps to create your own custom bookshelf:

1. Plan and measure.

Determine the size and design of your bookshelf, considering the available space and your storage needs. Measure and mark the dimensions on a piece of paper or use design software for more precise planning.

2. Gather materials and tools.

Based on your design, purchase the necessary lumber, screws, brackets, and other materials. Ensure you have the appropriate tools such as a saw, drill, level, tape measure, and sandpaper.

3. Cut the lumber.

Using the measurements from your plan, cut the pieces of lumber to size using a saw or have them cut at a hardware store if needed. Sand any rough edges to create a smooth finish.

4. Assemble the frame.

Start by building the outer frame using screws or brackets at each corner. Use a level to ensure it is straight and square before attaching additional shelves or dividers.

5. Install shelves and dividers.

Add shelves inside the frame according to your desired spacing and height requirements. Secure them with screws or brackets along each side of the frame. If adding dividers, attach them vertically between shelves for added stability.

6. Sand and finish.

Sand all surfaces of the bookshelf until smooth, paying extra attention to corners and edges. Apply paint, stain, or varnish according to your preference for protection and aesthetics.

7. Mount or place in desired location.

If your bookshelf is freestanding, position it in the desired location and ensure it is level. If you prefer a wall-mounted bookshelf, use appropriate brackets or anchors to secure it to the wall.

Building a bookshelf from scratch allows you to customize its size, style, and finish to match your home decor. Enjoy organizing your books and displaying decorative items on your handmade creation!

Dad, how to negotiate a salary raise at work?

Tips for Negotiating a Salary Raise at Work

Negotiating a salary raise can be nerve-wracking, but with proper preparation and confidence, you can increase your chances of success. Follow these tips for an effective negotiation:

1. Research industry standards.

Gather information about average salaries for similar roles in your industry and geographic area. This knowledge will give you leverage during negotiations.

2. Document your achievements.

Create a list of your accomplishments, contributions, and any additional responsibilities you’ve taken on since your last salary review. Quantify results whenever possible to showcase your value to the company.

3. Choose the right time.

Pick an opportune moment to discuss a raise with your manager. Ideally, schedule a meeting after completing a significant project or achieving exceptional results that demonstrate your worth.

4. Practice your pitch.

Prepare talking points highlighting why you deserve a raise based on your performance and market research. Anticipate potential objections or questions from your manager and have well-thought-out responses ready.

5. Be confident but respectful.

Approach the negotiation with confidence in yourself and the value you bring to the company. Remain professional and respectful throughout the conversation, focusing on facts rather than emotions.

6. Present your case.

During the meeting, clearly articulate your accomplishments and the impact you’ve had on the company’s success. Discuss your research on industry standards and explain why you believe a salary increase is justified.

7. Listen actively.

Allow your manager to express their thoughts and concerns. Listen actively to understand their perspective and be open to feedback or alternative proposals.

8. Negotiate beyond salary.

If a raise isn’t immediately possible, consider discussing other forms of compensation such as additional vacation time, flexible work hours, professional development opportunities, or performance-based bonuses.

9. Follow up in writing.

After the meeting, send a thank-you email summarizing the main points discussed and any agreed-upon actions. This ensures everyone is on the same page and provides a record of the conversation.

Remember that negotiation is a two-way process, and it may require compromise from both parties. Be prepared for different outcomes but remain positive and persistent in advocating for fair compensation based on your contributions.

Dad, how to make homemade pizza dough?

A Simple Recipe for Homemade Pizza Dough

Making pizza dough from scratch allows you to enjoy a fresh and flavorful base for your favorite toppings. Follow this easy recipe to create delicious homemade pizza dough:


  • 2 ¼

    Dad, how to change the oil in my car?

    Gather the necessary tools and materials

    To change the oil in your car, you will need a few tools and materials. First, make sure you have a wrench or socket set that fits the size of your oil drain plug. You will also need an oil filter wrench to remove the old oil filter. Additionally, gather a new oil filter, the correct type and amount of motor oil for your vehicle, an oil catch pan, and some gloves to protect your hands.

    Drain the old oil

    Start by parking your car on a level surface and allowing it to cool down for a bit. Then, locate the oil drain plug underneath your car’s engine. Place the oil catch pan beneath it to collect the old oil. Use the wrench or socket set to loosen and remove the drain plug. Allow all of the old oil to drain out completely.

    Replace the oil filter and add new oil

    Once all of the old oil has drained out, it’s time to replace the old oil filter with a new one. Use an appropriate-sized filter wrench to remove the old filter. Before installing the new one, apply a thin layer of fresh motor oil around its rubber gasket to ensure a proper seal. Then, hand-tighten the new filter until snug.

    After replacing the filter, locate your car’s oil filler cap on top of its engine and remove it. Insert a funnel into the opening and carefully pour in the recommended amount of new motor oil for your vehicle. Once done, securely tighten back on the filler cap.


    – It is important to properly dispose of used motor oil at designated collection centers.
    – Check your car’s owner manual for specific instructions regarding recommended motor oils and maintenance intervals.
    – Consider wearing safety goggles to protect your eyes from any oil splatters during the process.


    – Be cautious when working with hot oil as it can cause burns.
    – Ensure that your car is properly supported and secure before crawling underneath it.

    Dad, how to properly clean and maintain leather shoes?

    Gather the necessary cleaning supplies

    To properly clean and maintain leather shoes, you will need a few supplies. Start by gathering a soft brush or cloth, a mild soap or leather cleaner, a small bowl of warm water, a clean towel, and leather conditioner or shoe polish in the appropriate color for your shoes.

    Remove dirt and stains

    Begin by using the soft brush or cloth to gently remove any loose dirt or dust from the surface of your leather shoes. If there are any stains, dampen the cloth with warm water and apply a small amount of mild soap or leather cleaner. Gently rub the stained area in circular motions until the stain lifts. Avoid using excessive water or harsh chemicals as they can damage the leather.

    Condition and polish

    Once your shoes are clean and dry, it’s time to condition them. Apply a small amount of leather conditioner onto a clean cloth and rub it into the surface of your shoes using circular motions. This will help moisturize and restore the natural oils of the leather, keeping it supple and preventing cracks.

    If you prefer a polished look, choose a shoe polish that matches the color of your shoes. Apply a thin layer of polish using an applicator brush or cloth, then let it sit for a few minutes to dry. Once dry, use another clean cloth to buff the shoes in gentle circular motions until they shine.


    – Regularly cleaning and conditioning your leather shoes will prolong their lifespan.
    – Store your leather shoes in a cool, dry place to prevent moisture damage.
    – Avoid using excessive heat or direct sunlight to dry your shoes as it can cause the leather to crack.


    – Test any cleaning products on a small, inconspicuous area of your shoes before applying them to the entire surface.
    – Different types of leather may require specific cleaning methods, so consult the manufacturer’s instructions if available.

    Dad, how to navigate using a compass and map?

    Familiarize yourself with the compass

    To navigate using a compass and map, it’s important to understand how a compass works. Start by familiarizing yourself with the basic components of a compass, such as the magnetic needle and the cardinal directions (North, South, East, West). Learn how to hold the compass properly and ensure it is level for accurate readings.

    Obtain a detailed map

    Next, obtain a detailed map of the area you will be navigating. Look for key landmarks, topographical features, and symbols that indicate roads or trails. Familiarize yourself with the legend or key provided on the map to understand what each symbol represents.

    Orientate your map

    Once you have your compass and map ready, find a landmark that you can identify both on the ground and on your map. Hold your compass flat in front of you with its direction-of-travel arrow pointing towards that landmark. Rotate your body until the magnetic needle aligns with the orienting arrow inside the compass housing. Your map is now oriented correctly.

    Follow your desired route

    Using your oriented map, identify your starting point and destination. Trace out a route between these two points by following roads or trails indicated on the map. Keep an eye on landmarks along your route that will help you stay on track. Refer to your compass occasionally to ensure you are heading in the correct direction.


    – Practice using a compass and map in familiar areas before venturing into unfamiliar territory.
    – Consider carrying a backup compass and map, or use a GPS device as a supplementary navigation tool.


    – Always be aware of your surroundings and follow safety guidelines when navigating in remote or unfamiliar areas.
    – Ensure that you have permission to access any private property indicated on the map.

    In conclusion, the “Dad How To” concept offers a valuable resource for fathers seeking guidance and support in various aspects of parenting. This platform provides practical advice, tips, and solutions to help dads navigate their roles effectively and foster stronger relationships with their children.

Want to Improve Your Looks And Body?

Join The Newsletter

Join a private group & unlock exclusive content. Its 100% FREE. You can unsubscribe at any time. 

WAIT! Before you go….

For Men 18-35 & Single. Join The Dating Site With A 92.63% Success Rate! 😍

Discover where thousands of men are actually succeeding with dating in 2023.