How to Wear a Men’s Shirt: A Comprehensive Guide to Flawless Outfits (2023)

Want To Improve Your Looks & Body?

how to wear a men’s shirt

1. The Basic Steps to Properly Put on a Men’s Shirt

Step 1: Start with a Clean and Ironed Shirt

Before putting on a men’s shirt, make sure it is clean and wrinkle-free. Iron out any creases or wrinkles to ensure a crisp and polished look.

Step 2: Unbutton the Shirt

Begin by unbuttoning all the buttons on the front of the shirt, including the collar button. This will make it easier to put on and avoid any accidental tearing of buttons.

Step 3: Put Your Arms Through the Sleeves

Slide your arms through the sleeves of the shirt one at a time. Make sure that each arm is fully inserted into its respective sleeve.

Step 4: Button Up from Bottom to Top

Starting from the bottom, begin buttoning up the shirt. Take care to align the buttons properly with their corresponding buttonholes.

Step 5: Adjust Collar and Cuffs

Once you have buttoned up the shirt, adjust the collar so that it sits comfortably around your neck. Similarly, adjust and fasten any cuffs on the sleeves if applicable.


– When putting on a dress shirt, be mindful of any cufflinks or other accessories that may need to be attached before buttoning up.
– If wearing an undershirt, make sure it is tucked in properly before putting on your dress shirt for a neater appearance.
– Double-check that all buttons are securely fastened and aligned correctly for a polished look.

By following these basic steps, you can ensure that your men’s shirt is put on properly and presents a well-groomed appearance.

2. Determining the Correct Size of a Men’s Shirt for a Perfect Fit

Why Size Matters

Determining the correct size of a men’s shirt is crucial for achieving a perfect fit and ensuring comfort throughout the day. Wearing a shirt that is too small can restrict movement and cause discomfort, while wearing one that is too large can give off an unkempt appearance. To find the right size, it is important to consider factors such as neck circumference, chest measurement, sleeve length, and body type.

Measuring Neck Circumference

To determine the correct neck size for a men’s shirt, use a measuring tape to measure around the base of the neck where the collar would sit. It is essential to measure without pulling too tight or leaving any slack. The measurement should be rounded up to the nearest half inch to ensure a comfortable fit.

Taking Chest Measurement

The chest measurement plays a significant role in finding the right size of a men’s shirt. To measure the chest accurately, wrap the measuring tape around the fullest part of the chest while keeping it parallel to the ground. Make sure not to pull too tight or leave any slack as this can affect accuracy. It is advisable to add an extra inch or two to allow for ease of movement and comfort.

– Consider factors such as neck circumference, chest measurement, sleeve length, and body type when determining shirt size.
– Measure neck circumference by using a measuring tape around the base of the neck without pulling too tight or leaving slack.
– Take chest measurement by wrapping measuring tape around fullest part of chest parallel to ground without pulling too tight or leaving slack.

3. Guidelines for Buttoning Up a Men’s Shirt

The Importance of Proper Buttoning

Buttoning up a men’s shirt may seem like a simple task, but doing it correctly can significantly impact the overall appearance and comfort. Proper buttoning ensures that the shirt fits well, maintains its shape, and enhances the wearer’s style. Following these guidelines will help achieve a polished look.

Start from the Bottom

When buttoning up a men’s shirt, always start from the bottom and work your way up. Begin by fastening the bottom button and then proceed to the next one above it. This method allows for a neater appearance and prevents any pulling or strain on the fabric.

Leave the Top Button Unbuttoned

Unless wearing a tie, it is generally recommended to leave the top button of a men’s shirt unbuttoned. This provides a more relaxed and casual look while still maintaining a polished appearance. However, if wearing a tie, ensure that the top button is securely fastened for a sharp and professional look.

– Properly buttoning up a men’s shirt enhances its fit, shape, and overall style.
– Start buttoning from the bottom to maintain neatness and prevent fabric strain.
– Leave the top button unbuttoned for a relaxed look unless wearing a tie.

(Note: The remaining subheadings will be expanded in separate responses due to character limitations.)

4. Open or Closed: Deciding How to Wear the Collar of a Men’s Shirt

Understanding Collar Styles

When it comes to deciding how to wear the collar of a men’s shirt, it is important to understand the different collar styles available. Some common collar styles include the classic point collar, the spread collar, and the button-down collar. The point collar is versatile and suits most face shapes, while the spread collar is wider and works well with larger tie knots. The button-down collar has buttons that fasten the points to the shirt, giving a more casual look.

Tips for Wearing an Open Collar

Wearing an open collar can create a relaxed and casual look. To achieve this style, unbutton all of the buttons on your shirt except for the top one or two. This allows for a more comfortable fit around the neck while still maintaining a polished appearance. Pairing an open-collar shirt with jeans or chinos can create a stylish yet laid-back outfit suitable for social events or casual Fridays at work.

Tips for Wearing a Closed Collar

A closed-collar look is more formal and professional. To achieve this style, ensure that all buttons on your shirt are fastened up to the top button. This creates a clean and polished appearance that is suitable for business meetings or formal occasions. When wearing a tie with a closed-collar shirt, make sure that it fits snugly around your neck without feeling too tight.

5. Tips for Neatly Tucking in a Men’s Shirt

Choosing the Right Shirt Length

To achieve a neatly tucked-in look, it is essential to choose shirts with appropriate lengths. A shirt that is too long will bunch up when tucked in, creating an untidy appearance. On the other hand, a shirt that is too short may come untucked easily. Ideally, the shirt should end just below the waistband of your pants, allowing for a clean and streamlined look.

Steps for Neatly Tucking in a Shirt

1. Start by unbuttoning and unzipping your pants to create enough room for tucking.
2. Hold the shirt by its side seams and pull it down towards your waistband.
3. Smooth out any wrinkles or folds on the front and sides of the shirt.
4. Tuck in the shirt evenly around your waistband, making sure it is snug but not overly tight.
5. Button up your pants and zip them, ensuring that the shirt remains tucked in securely.

Using Shirt Stays

For those who want to ensure their shirts stay neatly tucked in throughout the day, using shirt stays can be beneficial. Shirt stays are elasticized straps that attach to the bottom of your shirt and connect to your socks or leg garters. They help keep the shirt securely tucked in place, even during movement or extended periods of sitting.

Note: Remember to adjust your shirt after sitting or standing for long periods to maintain a neat appearance.

6. Styling a Men’s Shirt for Various Occasions: Different Ways to Do It

Casual Occasions:

For casual occasions, such as a weekend brunch or a day out with friends, you can style a men’s shirt in a more relaxed and laid-back manner. Opt for a button-down collar shirt in a breathable fabric like cotton or linen. Pair it with chinos or jeans for a comfortable yet stylish look. Roll up the sleeves for an added touch of casualness and accessorize with a leather belt and sneakers.

Formal Occasions:

When dressing up for formal occasions, it is important to choose a well-fitted dress shirt in a classic color like white or light blue. Pair it with tailored trousers and dress shoes. Ensure that the shirt is neatly pressed and tucked in properly. Add sophistication by wearing cufflinks and a matching tie. Consider adding a blazer or suit jacket for an extra polished appearance.

7. Rules Regarding Cufflinks with French Cuffs on a Men’s Shirt

Choosing the Right Cufflinks:

When wearing French cuffs on a men’s shirt, it is essential to select appropriate cufflinks that complement the overall outfit. Opt for cufflinks made from high-quality materials like sterling silver or gold for formal occasions. For more casual events, you can experiment with novelty cufflinks featuring unique designs or patterns.

Matching Cufflinks with Other Accessories:

To create a cohesive look, consider coordinating your cufflinks with other accessories such as your tie clip, belt buckle, or watch strap. This will help tie together your entire ensemble and showcase attention to detail.

8. Choosing the Right Tie to Complement a Men’s Shirt

Color Coordination:

When selecting a tie to complement a men’s shirt, it is crucial to consider color coordination. Opt for a tie that either complements or contrasts with the color of the shirt. For example, if you are wearing a light blue shirt, choose a tie in shades of navy or burgundy for a complementary look. Alternatively, you can opt for a contrasting color like yellow or purple to make a bolder statement.

Pattern and Texture:

In addition to color, pay attention to the pattern and texture of both the shirt and tie. If your shirt has a bold pattern, such as stripes or checks, opt for a solid-colored tie to avoid overwhelming the overall look. Conversely, if your shirt is plain, you can experiment with ties featuring patterns or textures like polka dots or woven silk.

9. The Appropriateness of Wearing an Undershirt with a Men’s Dress Shirt, and Recommended Types

Benefits of Wearing an Undershirt:

  • Improved Sweat Absorption: An undershirt can help absorb sweat and prevent it from reaching your dress shirt, keeping you feeling fresh throughout the day.
  • Added Comfort: Wearing an undershirt can provide an extra layer of comfort by reducing friction between your skin and the dress shirt.
  • Increase Longevity: By acting as a barrier between your body and the dress shirt, an undershirt can help prolong the lifespan of your favorite shirts by preventing stains and odors.

Recommended Types of Undershirts:

  • Crew Neck Undershirts: These are versatile options that work well with most types of dress shirts. They provide coverage for the chest and can be worn with or without a tie.
  • V-Neck Undershirts: These are ideal for wearing with dress shirts that have an open collar or when you want to leave the top buttons undone. The V-neck shape remains hidden beneath the shirt while providing a clean look.

10. Common Mistakes to Avoid When Wearing a Men’s Shirt

Choosing the Wrong Size:

One of the most common mistakes men make is wearing a shirt that is either too big or too small for their body type. Ensure that your shirt fits properly by checking the shoulder seams, sleeve length, and overall fit around the chest and waist. Consider getting your shirts tailored for a perfect fit.

Neglecting Proper Ironing or Steaming:

A wrinkled shirt can instantly ruin an otherwise polished look. Take the time to properly iron or steam your shirt before wearing it to ensure a crisp appearance. Pay attention to collars, cuffs, and plackets to achieve a professional finish.

In conclusion, wearing a men’s shirt can be effortlessly stylish and versatile for both men and women. By following these simple tips and techniques, anyone can confidently rock a men’s shirt in various fashion-forward ways.

Want to Improve Your Looks And Body?

Join The Newsletter

Join a private group & unlock exclusive content. Its 100% FREE. You can unsubscribe at any time. 

WAIT! Before you go….

For Men 18-35 & Single. Join The Dating Site With A 92.63% Success Rate! 😍

Discover where thousands of men are actually succeeding with dating in 2023.